Rambler's Top100
Все новости World News

CableLabs Next-Gen Broadband Project Envisions Multigigabit Speeds

27 апреля 2010

Cable's next major broadband technology platform may throw DOCSIS out the window -- but it is envisioned to let operators economically deliver gobs of bandwidth over existing coaxial cable.

CableLabs, the industry's research and development consortium, is in the earliest stages of investigating a new platform for data-over-coax transmission reconceived from the ground up, according to people familiar with the project.

The concept, if it comes to fruition, could let cable operators deliver extremely high speeds downstream, of up to 5 Gigabits per second -- or even more.

The new platform potentially represents a major architectural change for existing cable systems. "It's almost a complete relook at how you do data over coax," said a cable-technology executive briefed on the CableLabs project. "If you were to convert all the spectrum in a typical cable system to data you could easily get 5 Gigabits per second."

But there are a number of caveats.

CableLabs currently is only investigating the approach, and the work might not ever result in a technical specification. Also, this new data-oriented technology likely would not be compatible with current DOCSIS cable modem equipment.

Asked to comment on the project, CableLabs spokesman Mike Schwartz said, "CableLabs is in business to explore many different technologies on behalf of its members." He declined to comment further.

The initiative underscores the cable industry's position that the hybrid fiber coax (HFC) network architecture will be sustainable for many years -- if not decades -- without requiring a complete fiber-to-the-home buildout.

Executives familiar with the project said CableLabs is exploring new advanced media access control (MAC) and physical-layer (PHY) components for cable broadband equipment that would do away with the traditional 6-MHz channel divisions used in cable systems today.

Theoretically, CableLabs' current DOCSIS 3.0 spec can deliver multiple gigabits-per-second speeds. The specification "bonds" multiple 6-MHz channels together to aggregate the bandwidth provided by each one (typically about 38 Mbps downstream).

The post-DOCSIS approach, by eliminating the 6-MHz divisions, potentially would be far more efficient.

Even if the new data-over-coax platform never sees the light of day, DOCSIS 3.0 should provide cable operators ample bandwidth delivery for the next several years. The specification requires support for a minimum of four downstream channels (for a total of 160 Mbps) but chip suppliers have already delivered eight-channel products that deliver more than 300 Mbps down.

Cisco Systems, for one, has developed a DOCSIS 3.0 cable modem with Broadcom's silicon to bond together eight downstream channels, capable of delivering more than 300 Mbps.

And, in 2008, Cisco demonstrated a prototype of a system emulating a DOCSIS 3.0 cable modem operating at 1 Gbps by delivering the data over an optical network. That setup, however, would require an all-fiber network. 

Источник: Multichannel News

Заметили неточность или опечатку в тексте? Выделите её мышкой и нажмите: Ctrl + Enter. Спасибо!

Оставить свой комментарий:

Для комментирования необходимо авторизоваться!

Комментарии по материалу

Данный материал еще не комментировался.